Install the System
Quick Installation Guide | 3 |
Before You Begin
3Before you install the system:
■Move the system close to where you plan to install it, and close to a power receptacle.
■Have a No. 2 Phillips screwdriver available.
■Have the hardware kit available. See Table 2.
Table 2 System Hardware Mounting Kit
Item | Qty | Use in |
|
|
|
Rubber feet | 4 | Installing the system on a table top |
Mounting brackets | 2 | Installing the system in the distribution |
|
| rack |
8 | Installing the distribution rack mounting | |
screws |
| brackets |
4 | Installing the system in the distribution | |
screws |
| rack |
|
|
|
Determine whether you are installing the system on a tabletop or in a distribution rack.
For complete installation instructions, see the chapter on “Installing the System” in the Getting Started Guide.
WARNING: Hazardous energy exists within the system. Always be careful to avoid electric shock or equipment damage. Many installation and troubleshooting procedures should be performed only by trained technical personnel.