3Com 10014302 manual if-match acl, Parameter, Description, Example, Syntax

3Com Router Command Reference Guide Addendum for V1.2

Parameter

cir rate: Committed information rate.

cbs size: Burst size in the range of 15000 to 155000000 bits. By default, it is equal to half of cir rate.

ebs size: Excessive burst size in the range of 0 to 155000000 bits. By default, it is 0.

queue-lengthlength: Queue length in the range of 1 to 1024. By default, it is 50.

Description

Using the gts command, you can configure traffic shaping for a class. Using the undo gts command, you can delete traffic shaping for a class.

The policy configured with gts can only be applied to the output direction of an interface.

Applying a policy configured with gts on an interface will cause the previously configured qos gts command ineffective.

If this command is frequently configured on classes of the same policy, the last configuration will overwrite the previous ones.

For the related command, see qos policy, qos-class.

Example

Configure GTS for a class with the specific features as follows: the normal traffic is 38400bit/s; the burst traffic twice normal traffic can pass initially; the traffic no larger than 38400bit/s can be transmitted normally under normal conditions and that larger than 38400bit/s enters queue buffer lately; the buffer queue length is 100.

[3Com] qos policy 3Com

[3Com-qospolicy-3Com] qos-class database

[3Com-qospolicy-c-3Com database] gts cir 38400 cbs 76800 ebs 0 queue-length

100

1.10 if-match acl

Syntax

if-match [ logic-not ] acl acl-number

undo if-match [ logic-not ] acl acl-number

13