3Com 10014302 manual Parameter, Description, Example, 3Com display qos policy

Page 8

3Com Router Command Reference Guide Addendum for V1.2

Parameter

policy-name: Name of policy. By default, the configuration information of all policies are displayed.

class-name: Class name in the policy.

Description

Using the display qos policy command, you can browse the configuration information of the specified or all classes of the specified or all policies.

Example

[3Com] display qos policy

QoS Policy Configuration Information:

Policy: test

Class: default-class

Behavior(s):

-none-

Class: AF

Behavior(s):

Committed Access Rate:

CIR 8000 (Bps), CBS 15000 (Bit), EBS 0 (Bit)

Conform Action: pass

Exceed Action: discard

Policy: 3Com

Class: default-class

Behavior(s):

-none-

Class: 3COM

Behavior(s):

Expedited Forwarding

Bandwidth 8 (Kbps) Burst 1500 (Byte)

Class: AF

Behavior(s):

Assured Forwarding

Bandwidth 20 (%)

Discard Method: Tail (Max Threshold 64 packets)

8

Image 8

Contents Published January Command Reference Guide Addendum for3Com Router Download the Router 3000 Installation Guide from Download the Router 5000 Installation Guide fromDownload the 3Com Router Command Reference Guide from Download the 3Com Router Configuration Guide fromChapter 1 CBQ Configuration Commands 1.1 afSyntax Viewundo car 1.2 carcar cir rate cbs size ebs size conform action exceed action 1.3 debugging qos number1.4 display qos cbq interface display qos cbq interface type number1.5 display qos class 1.6 display qos policydisplay qos class class-name display qos policy policy-name class class-name3Com display qos policy 1.7 display qos policy interface display qos policy interface type number inbound outboundBehaviors Default Queue Flow Based Fair Queueing 1.8 ef ef bandwidth bandwidth cbs size undo ef1.9 gts gts cir rate cbs size ebs size queue-length length undo gtsundo if-match logic-not acl acl-number 1.10 if-match aclif-match logic-not acl acl-number if-match logic-not any undo if-match logic-not any 1.11 if-match anyaccess-list-number ACL number undo if-match logic-not class class-name 1.12 if-match classif-match logic-not class class-name 1.13 if-match criteria if-match logic-not criteria undo if-match logic-not criteria1.14 if-match inbound-interface 1.15 if-match ip-dscpnumber Interface number if-match logic-not inbound-interface type numberundo if-match logic-not ip-precedence value value … 1.16 if-match ip-precedenceif-match logic-not ip-precedence value value … undo if-match logic-not destination-mac source-mac mac-address 1.17 if-match mac-addressif-match logic-not destination-mac source-mac mac-address undo if-match logic-not protocol ip 1.18 if-match protocolif-match logic-not protocol ip 1.19 if-match rtp 1.20 qmtokenqmtoken token-number undo qmtoken1.21 qos apply policy undo qos class logic-and logic-or class-name 1.22 qos classqos class logic-and logic-or class-name 1.23 qos max-bandwidth qos max-bandwidth kilobits undo qos max-bandwidth1.24 qos policy qos policy policy-name undo qos policy policy-name1.25 qos reserved-bandwidth qos reserved-bandwidth pct percent undo qos reserved-bandwidth1.26 qos-class 1.27 queue-lengthqos-class class-name undo qos-class class-name queue-length queue-length undo queue-length queue-length1.28 remark ip-dscp remark ip-dscp value undo remark ip-dscp value1.29 remark ip-precedence remark ip-precedence value undo remark ip-precedence value1.30 wfq 1.31 wredwfq queue-number total-queue-number undo wfq1.32 wred ip-dscp undo wred ip-dscp ip-precedencediscard-prob undo wred ip-dscp dscp-valueView 1.33 wred ip-precedence undo wred ip-precedence value1.34 wred weighting-constant wred weighting-constant exponent undo wred weighting-constantinterface-type interface-number Interface name and number Chapter 2 TACACS+ Configuration Commands2.1 debugging hwtacacs 2.2 display hwtacacs accounting Example 2.3 display hwtacacs server domain undo domain 2.4 domainFor a related command, see reset hwtacacs server statistics 2.5 host Parameter Warning Reach the max limited of server in one template 2.6 hwtacacs-server template 2.7 reset hwtacacs accounting statistics 2.8 reset hwtacacs server statisticsreset hwtacacs accounting statistics reset hwtacacs server statistics2.9 shared-key shared-key key-string2.10 source-ip undo source-ip2.11 timer quiet Chapter 3 SSH Configuration Commands 3.1 debugging rsa3.2 debugging ssh server debugging rsa undo debugging rsa3.3 display rsa local-key-pair public display rsa local-key-pair public3Com display rsa local-key-pair public 3.4 display rsa peer-public-key display rsa peer-public-key brief name keyname3.5 display ssh server display ssh server status session3.6 display ssh user-information 3.7 hexdisplay ssh user-information username hex hex-dataD6C54A36 3.8 kill ssh kill ssh all userID userid3.9 protocol inbound protocol inbound ssh telnet numbers acl acl-number3.10 public-key-code begin public-key-code begin3.11 public-key-code end public-key-code end3.12 rsa local-key-pair create rsa local-key-pair create3.13 rsa local-key-pair destroy rsa local-key-pair destroy3.14 rsa peer-public-key rsa peer-public-key key-name undo rsa peer-public-key key-nameundo ssh server authentication-retries 3.15 ssh server authentication-retriesssh server authentication-retries times 3.17 ssh server timeout 3.16 ssh server rekey-intervalssh server timeout seconds undo ssh server timeout ssh server rekey-interval hours undo ssh server rekey-intervalundo ssh user username assign rsa-key 3.18 ssh user username assign rsa-keyssh user username assign rsa-key keyname undo ssh user username authentication-type password RSA all 3.19 ssh user authentication-typessh user username authentication-type password RSA all 3Com ssh user smith authentication-type password Chapter 4 NTP Configuration Commands 4.1 debugging ntp-service4.2 display ntp-service sessions display ntp-service sessions verbose4.3 display ntp-service status display ntp-service status4.4 display ntp-service trace display ntp-service traceundo ntp-service access query synchronization server peer 4.5 ntp-service accessntp-service access query synchronization server peer acl-number 4.6 ntp-service authentication enable 4.7 ntp-service authentication-keyidntp-service authentication enable undo ntp-service authentication enable4.8 ntp-service broadcast-client ntp-service broadcast-client undo ntp-service broadcast-client4.9 ntp-service broadcast-server 4.10 ntp-service max-dynamic-sessions 4.11 ntp-service multicast-clientntp-service max-dynamic-sessions number undo ntp-service max-dynamic-sessions4.12 ntp-service multicast-server undo ntp-service multicast-server4.13 ntp-service refclock-master undo ntp-service reliable authentication-keyid number 4.14 ntp-service reliable authentication-keyidntp-service reliable authentication-keyid number 4.15 ntp-service source-interface undo ntp-service source-interface4.16 ntp-service source-interface disable 4.17 ntp-service unicast-peerundo ntp-service unicast-peer 4.18 ntp-service unicast-server undo ntp-service unicast-server3Com ntp-service unicast-server 128.108.22.44 version Chapter 5 X2T Configuration Commands 5.1 debugging x25 x2t5.2 display x25 x2t route debugging x25 x2t all event packet5.3 display x25 x2t switch-table 5.4 translate ipdisplay x25 x2t switch-table translate ip ip-address port port-number x25 x.121-address5.5 translate undo translate ip ip-address port port-numberRoutertranslate x25 12322 ip 10.110.54.19 port Chapter 6 Additional ISDN Configuration Commands 6.1 isdn ignore callednum6.2 isdn ignore hlc 3Com-E1-0 interface serial 215 3Com-serial215 isdn ignore callednum6.3 isdn ignore llc 6.4 isdn waitconnectack6.5 display isdn spid SyntaxView Parameter6.6 isdn ignore dchan Example6.7 isdn protocol-type 6.8 isdn q931-timer undo isdn q931-timer timer-name all6.9 isdn spid auto-trigger 6.10 isdn spid nit 6.11 isdn spid timer 6.12 isdn spid resend Example 6.13 isdn spid service3Com-bri0 isdn spid service data 3Com-bri0/0 isdn spid service speech 6.14 isdn spid1 6.15 isdn spid23Com-bri0 isdn spid2