2Wire 100SW manual HomePortal Indicator Lights, HomePortal indicator and status lights

The HomePortal Indicator Lights

HomePortal indicator and status lights

The HomePortal has three indicator lights that can be used to diagnose installation and connection problems. The following tables describe how to interpret the POWER, BROADBAND LINK, and HOME NETWORK lights.

Power light	Operating state
OFF	The HomePortal is not getting power.
Blinking green	The HomePortal is booting up.
Solid green	Power is on.
Solid red	System error. Contact Technical Support.

Broadband Link light	Operating state
OFF	No broadband signal is present. The HomePortal is not plugged into a power
	outlet, or the HomePortal is not physically connected to your broadband
	service.
Blinking orange	The HomePortal is attempting to establish a physical broadband connection.
Solid red	The HomePortal has not detected a broadband signal.
Solid orange	The HomePortal has established a physical broadband connection but was
	not able to successfully connect to your Internet Service Provider, or has not
	yet been configured.
Blinking green	The HomePortal is attempting to establish a connection to your broadband
	service(s).
Solid green	The HomePortal is fully connected to your broadband service(s).

Home Network light	Operating state
OFF	The HomePortal is not plugged into a power outlet, or the HomePortal is not
	connected to any computer or hub by way of HomePNA, USB, Ethernet, or
	wireless.
ON	The HomePortal is connected to a computer or hub by way of HomePNA,
	USB, Ethernet, or wireless.

21