2Wire 100SW manual

6.To identify your network, click Next. The Edit Configuration screen appears.

7.In the Network Name field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial number, located on the bottom of your HomePortal. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word “2WIRE” in capital letters.

8.Click Next. In the Set Security field, check the

Enable Data Security checkbox. Verify that the Use Hexadecimal (0-9, a-f, A-F) radio button is selected.

9.In the Key field, enter your ten-digit Wireless Encryption Key, located on the bottom of your HomePortal.

10.Verify that Key 1 is selected in the Encrypt data with pull-down menu (this is the default).

11.To select a power management option, click Next. The following screen appears.

12.Select the power management option that you wish to use (the default is Off), and click Next.

39