Electrical Connections
BATT +12V
Connect this terminal with the 12VDC pole of the battery, by using an appropriate power supply wire with a profile of 10 - 20 qmm. Please also install a additional
GND
Connect this terminal with the vehicle’s chassis. The ground connection should be as short as possible and should be mounted at a blank metallic point on the chassis. Ensure a stable and safe connection to the
REM
Connect the remote turn on/off wire of your headunit with the REM- terminal of the soundsystem. This ensures that your Soundsystem turns on and off with your headunit. If your headunit is not equipped with a remote wire, you can also use the power on/off wire of a electrical antenna.
FUSE
The integrated fuse protect your Soundsytem from shorts and overheating. If this fuse is damaged, replace the fuse only with a appropriate fuse with the same rating and construction.
IMPORTANT: Please ensure for all connections the correct polarity. Faulty and interchanged polarity may cause malfunctions and damage.