Olympus VN-180 VN-90 manual Message Alarm Playback Setting the message alarm, Alarm playback

Message Alarm Playback

✰Setting the message alarm

11 Select the message you want to play as an alarm by pressing the

	(	) or (	) button so that
	the message No. is displayed in
	the LCD.
	2 Press and hold the MENU/
	FOLDER button for more than 1
	second. Then after pressing the
2	(	) button three times to
	select the [ALARM] setting in the
	Options mode, press the MENU/
	FOLDER button again to enter
	the [ALARM] screen.
	3 Each time you press the MENU/
	FOLDER button, the date/time
	items start to blink in order of
3	“month”, “date”, “hour” and
	“minute”. Set the desired date
	and time for alarm playback by
	pressing the (		) or (	)
	button.
	When you have finished alarm
	setting, press the STOP button.
	After the alarm has gone off, the
	alarm setting for that message
	will be canceled.
	Up to 20 alarm messages can be set.

Alarm messages cannot be set if 20 messages have already been set or the message No. being selected is No. 0.

To cancel a set alarm message, select the set alarm message No., perform operations in steps 2 and 3, then press the MENU/ FOLDER button. When the LCD shows the message alarm ON/

OFF display, select OFF by pressing the () or () button.

✰Alarm playback

1At the specified alarm time, the recorder will beep in short tones.

15