Philips LFH3000 manual Technical data

Page 19

6 Technical data

Connectivity

Wireless connection with operating range up to 10 meters (33 feet)

USB: Mini-USB 2.0

DC in: 6 V

Headset: 3.5 mm

Microphone

Microphone type: electret condenser microphone

Microphone cartridge: 10 mm

Characteristic: uni-directional

Frequency response: 100 – 7500 Hz

Microphone sensitivity: -37 dB @ 1 kHz

Signal-to-noise ratio: > 70 dBA

Speaker

Built-in 30 mm round, dynamic speaker

Acoustic frequency response: 300 – 7500 Hz

Output power: > 200 mW

Specifications

Product dimensions (W x D x H):

45 × 165 × 30 mm / 1.8 × 6.5 × 1.2 inch

Weight: 125 g / 4.4 oz (including batteries)

System requirements

Pentium III, 500 MHz and 512 MB RAM; Recommended: Pentium IV or similar, 1 GHz and 1 GB RAM

100 MB hard disk space for SpeechExec, 250 MB for Microsoft .NET Framework

One free USB port

Recommended minimum transfer rate for LAN: 100 Mbit/s

Windows Vista (with Service Pack 1), Windows XP (with Service Pack 3)

Power

Battery type: two Philips AAA Ni-MH rechargeable batteries (LFH9154) or two AAA batteries (LR03 or R03)

Power supply: 6 V DC / 850 mA

Up to 7 hours of recording (with Philips rechargeable batteries LFH9154)

Typical time for a full charge: 2.5 hours

Green specifications

Compliant to 2002/95/EC (RoHS)

Lead-free soldered product

Operation conditions

Temperature: 5° – 45° C / 41° – 113° F

Humidity: 10 % – 90 %

Optional accessories

Philips noise-canceling headset LFH3090

Philips SpeechMike Air docking station LFH3050

Philips AAA Ni-MH rechargeable batteries LFH9154

Philips power supply LFH9146

20

User manual

Image 19
Contents Speechmike AIR Use your SpeechMike Air Technical data Frequently asked questionsYour SpeechMike Air Get startedSmall children SafetyHearing safety Important for models supplied with headphonesCompliance with EMF Not carry the wireless device in a breast pocketHearing aids VehiclesDisposal of your old product Cleaning and disinfectionWhat’s in the box Your SpeechMike AirOverview SpeechMike Air Dictation microphone Docking station SpeechMike docking slot Power indicator lightReceiver module Connect the docking station Install the softwareGet started Turn on the computerCharge the batteries Charging using the docking station and the AC chargerTip Insert the batteriesCharging directly through the SpeechMike Charging using the docking station and the USB cableLearn about the battery charge level Battery charge Battery status level indicatorTurning on/off the SpeechMike Set up the wireless connection manuallyLocate the SpeechMike Power-save modeAttach the neckband Create a recording Use your SpeechMike AirUse more of your SpeechMike Air Customize SpeechMike keys and settings SpeechMike key Assigned shortcut Default profile Powerpoint profile Use application shortcutsUpdate the firmware Click the Apply button to save the new settingsHotkey Assign a keyboard shortcut Record with a headset or an external microphone Firmware upgrade takes about 30 secondsTechnical data Charge the dictation microphone Frequently asked questionsCheck the wireless connection Battery is very lowCanadian notice Federal Communications Commission NoticeModifications CablesDocument Version 1.0, 20/10/2009