Philips LFH3000 manual Get started, Install the software, Turn on the computer

Page 9

3 Get started

3.1Install the software

Recording and playback of dictations with the SpeechMike requires dictation software such as Philips SpeechExec to be installed on the computer. When third-party dictation software other than Philips SpeechExec is used, driver software must be installed before connecting the SpeechMike.

CImportant

Administrator rights are required to install the software. For more help, contact your administrator.

1Turn on the computer.

2Insert the installation CD in the CD-ROM drive. The set-up program should start automatically. If it does not, open the CD contents in Windows Explorer and double- click the autorun.exe file.

3Click the Install button.

4Follow the on-screen instructions of the set-up program.

2Plug the charger into a wall outlet and connect the charger cable to the charger connector of the docking station.

3Connect the USB cable to the USB port of the computer and the mini USB connector of the docking station.

3.2Connect the docking station

1The charger comes with four plugs, one for most European countries, one for the UK, one for the US and Canada and one for Australia. Before you use the charger for the first time select the correct plug fitting the wall outlets in your country and mount it onto the power adapter.

4Insert the receiver module into the corresponding slot of the docking station and press it down firmly until it locks.

10

User manual

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Speechmike AIR Your SpeechMike Air Technical data Frequently asked questionsGet started Use your SpeechMike AirHearing safety SafetyImportant for models supplied with headphones Small childrenHearing aids Not carry the wireless device in a breast pocketVehicles Compliance with EMFDisposal of your old product Cleaning and disinfection What’s in the box Your SpeechMike AirOverview SpeechMike Air Dictation microphone SpeechMike docking slot Power indicator light Docking stationReceiver module Get started Install the softwareTurn on the computer Connect the docking stationTip Charging using the docking station and the AC chargerInsert the batteries Charge the batteriesLearn about the battery charge level Charging using the docking station and the USB cableBattery charge Battery status level indicator Charging directly through the SpeechMikeTurning on/off the SpeechMike Set up the wireless connection manuallyPower-save mode Locate the SpeechMikeAttach the neckband Create a recording Use your SpeechMike AirUse more of your SpeechMike Air Customize SpeechMike keys and settingsPowerpoint profile Default profileUse application shortcuts SpeechMike key Assigned shortcutClick the Apply button to save the new settings Update the firmwareHotkey Assign a keyboard shortcut Record with a headset or an external microphone Firmware upgrade takes about 30 secondsTechnical data Check the wireless connection Frequently asked questionsBattery is very low Charge the dictation microphoneModifications Federal Communications Commission NoticeCables Canadian noticeDocument Version 1.0, 20/10/2009
Top Page Image Contents