JVC PU30425 Return to Normal Screen, SET Date and Time, SET Just Clock, Preset, Initial Settings

10

INITIALSETTINGS(cont.)

6

q

4

RETURN TO NORMAL SCREEN

Once clock setting is completed, press CLOCK to return to the normal screen.

Manual Clock Set

	2
1	2	3

	CLOCK	5	6
6	4
	7	8	9
		0

	SET DATE AND TIME
	Press PUSH JOG%Þ to set the hour, then press OK.
	The “minutes” display begins blinking. Repeat the
3 procedure to set the minutes, day, month and year.
4	SET JUST CLOCK
	The default setting is “ON”. Set as desired by pressing
	PUSH JOG%Þ, then press OK.
	● If you set to “OFF”, you can disregard the next step as
	you won’t be able to receive regular clock adjust-
	ments.
	SET CLOCK DATA SOURCE
5	PRESET
	The recorder is preset to receive clock setting and
	adjustment data from preset position 1. Press PUSH
	JOG%Þto set the preset position to the number
	representing the station transmitting clock setting data
	(BBC1, BBC2, etc.), then press OK.
	START CLOCK OPERATION
6 Press CLOCK.

3

1

3,4, PUSH JOG

5

OK 3,4, 5

NOTES:

●Just Clock (when set to "ON") enables adjustment of the recorder's built-in clock every hour on the hour, except for 11 o'clock in the evening and midnight.

●Just Clock is not effective when . . .

–the recorder’s power is on (unless the recorder is tuned to the same preset selected in the Clock Set screen).

–the recorder is in the Timer mode.

–a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

●The recorder’s clock is automatically adjusted at the start/end of Summer Time.

●Auto clock setting and Just Clock may not function properly depending on the reception condition.

●During Manual clock setting, if the day and month data are invalid (such as 31st April), the month digits are cleared automatically and the day digits begin blinking. Input the correct data.

●If, in step 3 of the Manual clock setting procedure, the year digits are automatically cleared and the day digits begin blinking, it is possible that you have input 29th February for a non-leap year. Input the correct data.