JVC PU30425 Access CH. SET Mode, Menu, Select Position, Input Channel, Enter NEW Channel

USINGTHECONFIRMATIONSCREEN41

6

q

		CH SET
			STORE
		2
	1	2	3
NUMBER	4	5	6
	7	8	9
		0

3 OK

1

PUSH JOG

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.

		ACCESS CH. SET MODE
1		MENU
		Press and hold CH SET for more than 2 seconds. The
		Ch. Set Mode menu appears.
		SELECT MODE
		Press PUSH JOG%Þ to select “MANUAL CH SET”,
2 then press OK. The Confirmation screen appears.
		SELECT POSITION
		Press PUSH JOG%Þ%%until an open position in
	which you want to store a channel begins blinking,
3 then press OK. The Manual Ch. Set screen appears.
		INPUT CHANNEL
		The number "21" appears blinking to the right of "CH".
		Press the NUMBER keys to input the preset number of
4 the channel you want to store.

●Although "CH" is set to "21" when the Manual Ch. Set screen appears, to store channel 21, you must select "21" using the NUMBER keys.

● For fine tuning adjustment, press PUSH JOG %until the item under "CH" begins blinking, then press PUSH JOG%Þ. While tuning, “F+” or “F–” appears.

	ENTER NEW CHANNEL
5	INFORMATION
	Press OK or STORE, and the Confirmation screen appears.
	● Repeat steps 3 through 5 as necessary.
	CLOSE CONFIRMATION
6	SCREEN
	Press CH SET.
	● To input the station name, see page 43.
	● To change positions, see page 42.