Radio Shack PRO-72 owner manual

3.If you are installing individual batteries, insert six AA batteries in the battery holder as indicated by the polarity symbols (+ and –) marked on the battery holder.

4.Slide the battery holder or battery pack into the com- partment as shown.

Caution: The battery holder or battery pack fits only one way inside the battery compartment. Do not force it.

5. Replace the cover.

When battery power is low, BATT flashes and the scanner beeps about every 3 seconds. Immediately replace all six non-rechargeable batteries, remove and recharge all six rechargeable batteries, or recharge the battery pack.

Caution: Always dispose of old batteries promptly and properly. Do not bury or burn them.

11