Direct Search
You can search up or down from the currently displayed frequency and store the frequency into the monitor mem- ory.
1.Press MANUAL or PGM, then use the number keys and DLY/• to enter the frequency where you want to start the search.
Note: To start from a frequency already stored in one of your scanner’s channels, press MANUAL or PGM, enter the desired channel number, then press MAN- UAL or PGM again.
2.Hold down 
or 
for about 1 second to search up or down from the selected frequency.
When the scanner finds an active frequency, it stops searching.
3.To store the frequency in the monitor memory, simply press MON/0. MON appears on the display.
4.To continue the search, hold down 
or 
for about 1 second.
31