Radio Shack PRO-72 owner manual

Notes:

•To reverse the search direction at any time, hold down for about 1 second.

•To search the band upward or downward in small increments (in steps of 5 or 12.5 kHz, depending on the band), repeatedly press and release or .

•To select a different band after the scanner begins searching the current band, simply repeat Step 2.

The scanner stops when it finds an active frequency.

3.To store the displayed frequency in the channel cur- rently flashing on the display, press E. The scanner stores the frequency, then the next available channel flashes.

Notes:

•You cannot store a frequency in the monitor mem- ory during band search.

•After you store a frequency into the last available channel, --chappears instead of a channel number. If you try to store a channel while --chappears, Ch FULL appears briefly. In order to store more frequencies, you must clear some channels. See “Clearing a Channel” on Page 34.

4.To search for another active frequency in the

selected band, hold down or for about 1 sec- ond.

30