1.Press down on the battery compartment cover and slide the cover in the direction of the arrow to remove it.
2.Disconnect the battery pack’s connector from the scanner’s connector. Then remove the battery pack from the battery compartment.
3.Attach the new battery pack's connector to the bat- tery socket inside the battery compartment. Then put the battery pack into the compartment.
4. Replace the cover.
When the scanner’s battery gets low, blinks and the scanner beeps about every 15 seconds.
Important: At the end of a rechargeable battery pack's useful life, it must be recycled or disposed of properly. Contact your local, county, or state hazardous waste management authorities for information on recycling or disposal programs in your area. Some options that might be available are: municipal
Using Standard AC Power
To power the scanner from AC power, use the supplied AC adapter/charger. Plug the adapter/charger's barrel
plug into the scanner's jack. Then plug the AC adapter/charger's power module into a standard AC out- let.
9