Radio Shack 20-163 Appendix B Search Banks, Search bank SR0 Marine band Receive mode FM Freq. MHz

Page 50

Talk Group ID – A simultaneous trunking transmission that identifies 2-way radio users. This allows trunking systems to allocate a few frequencies to multiple 2-way radio users.

Sub-bank– Each bank has an associated Talk Group ID sub-bank. In Closed mode, the scanner only stops if a transmission has a Talk Group ID saved in the associated Talk Group ID sub-bank. In Open Mode, the scanner stops on all transmissions, except those you lock out.

Appendix B: Search Banks

Note: All scanners tune by steps. Your RadioShack scanner uses steps consistent with the latest US or worldwide standards. If you enter a non-valid step frequency, any scanner will tune to the next step. Some scanner designs do this without showing the correct step in the display. This scanner will show the actual tuned frequency in the display. Because steps are so close together, the audio quality will not be affected by the offset.

Search bank: SR0 Marine band

Receive mode: FM

Ch.	Freq. (MHz)	Ch.	Freq. (MHz)	Ch.	Freq. (MHz)
01	156.0500	21	157.0500	72	156.6250

05	156.2500	22	157.1000	73	156.6750

06	156.3000	23	157.1500	74	156.7250

07	156.3500	24	157.2000	77	156.8750
			161.8000

08	156.4000	25	157.2500	78	156.9250
			161.8500

09	156.4500	26	157.3000	79	156.9750
			161.9000

10	156.5000	27	157.3500	80	157.0250
			161.9500

11	156.5500	28	157.4000	81	157.0750
			162.0000

12	156.6000	63	156.1750	82	157.1250

50

Image 50

Contents

What’s Included Mobile / Base Radio ScannerContents Contents Your Scanner Pause EXT SP Bracket Mounting Installing Your ScannerSetting Up a Mobile Base To you use the scanner on a flat surfaceDashboard Installation Connecting the Antenna To attach the supplied antennaPowering Your Scanner Wall OutletVehicle Power Socket Vehicle DirectHeadphones and Speakers Keytones and BrightnessDelay Squelch and AttenuatorScanner Setup To set the attenuator modeDefining a Channel To define a channelCopying a Frequency To copy a frequencyTo delete all saved frequencies in a bank Deleting Saved FrequenciesTo delete a saved frequency To define a channel’s Ctcss or DCS codeTo clone the scanner data Scanner CloningTo save a Ctcss or DCS code Search Banks SearchingSeek Search To activate Seek SearchTo search banks SR0-SR2 To activate Zeromatic ZeromaticProgramming a Search Range To program the search range of Bank SR7Signal Stalker To use Signal StalkerLocking Out Frequencies Special Signal StalkerTo use Special Signal Stalker To lock out a frequencyTo unlock all frequencies in a search bank Saving Found FrequenciesTo review and unlock frequencies To save a frequency found during a searchTo scan ScanningLocking Out Channels To locked out a channelTo review all locked out channels To turn on the priority featurePriority Scanning To make an existing channel a Priority channelTo perform a weather scan Weather AlertsTo modify the Priority channel To program a weather channel into priority channelSame Standby Mode To program a Fips codeTo test the weather alert To review stored Fips codesTo enter Same standby To use Skywarn MonitoringSkywarn To monitor a channelDefining a Trunking Bank Trunking SetupTo set a default tuning frequency To define a Trunking BankTrunking Modes Motorola Trunking SetupTo set Open or Closed mode for a bank Fleet Maps To program a fleet mapBase and Offset Frequencies For Motorola Type II, enterEdacs Trunking Setup UHF-Hi 806-960 MHz To program 800 MHz Motorola trunkingTo save a correct Home Repeater LTR Trunking SetupSearching for Talk Group IDs To define a Talk Group ID Saving a Talk Group IDTo search for Talk Group IDs To delete ALL talk group IDs in a bank 1. Press Prog Deleting Talk Group IDsTo delete a Talk Group ID Trunk Scanning Saving Trunking ChannelsTrunking Delay To set a Talk Group ID delayTo lock out Talk Group IDs Locking Out Talk Group IDsTurning Off Sub-Banks To review locked-out Talk Group IDsTo turn off a sub-bank while scanning Scanner MaintenanceTalk Group ID Hold To set Talk Group ID HoldText Tags To define a Text TagTo display the Talk Group ID Troubleshooting Issue Solution Birdie Frequencies Error message appears When trying to upload or CauseTo initialize the scanner Service and RepairInitializing the Scanner Scanning Legally Appendix a Glossary ReferencesFCC Notice Search bank SR0 Marine band Receive mode FM Freq. MHz Appendix B Search BanksSearch bank SR1 CB band Receive mode AM Freq. MHz Group Search bank SR4 Aircraft Receive mode AM, FM Appendix C Ctcss / DCS Codes Ctcss CodesDCS Codes Appendix D Signal StalkerAll Band PubSafety Band To use AFS format Appendix E Talk Group FormatMotorola Appendix F Specifications Sensitivity 20 dB S/NDB +/-4 kHz Addendum Cat. No -163Purple DOT Purple DOT BB Business Band Police Departments Police Dept Nascar Track Announcer Security Alarm Security Company Companies DOT Business Band DOT BB Limited One-year Warranty

Related manuals

Manual 3 pages 37.78 Kb