![](/images/new-backgrounds/1031268/3126835x1.webp)
5.Press FUNC, then MODE.
6.Use the or to select the desired CTCSS or DCS code.
You can enter the code manually. The scanner automatically fills in the code. See Appendix B for a list of codes.
7.Press ENT.
To save a CTCSS or DCS code:
Press ENT while the code appears.
Scanner Cloning
You can transfer the programmed data to and from another
You can also upload or download the programmed data to or from a PC using an optional USB cable and application software available through your local RadioShack store. The application software is also available online at www.starrsoft.com and www.scancat.com.
To clone the scanner data:
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s PC/IF jack. ** CLONE MODE ** appears.
3. Press . “Confirm to send data?” appears.
4. Press 1 to send the data to the other unit or press any other key to cancel.
5. To exit the clone mode, remove the cable.
“CLONE MODE Incorrect Model” appears if you connect a scanner other than a
18