JL Audio IWS-SYS-2, IWS-SYS-1 owner manual Master Level Knob, Lights, LP Filter, LP Freq

Page 14

Master Level Knob

The Master Level Knob is used to control the output level of the Fathom IWS when the Variable Level mode is selected on the front control panel.

When rotated fully counter clockwise, the Fathom IWS’s output will be fully muted. When at the “0” or straight up position, the Variable gain level matches the Reference level setting. When turned fully clockwise, the Fathom IWS’s output level is 15 dB higher than the Reference setting.

Lights

The “Lights” selector switch allows the user to select one of three indicator light modes.

“Off” turns off all of the front panel LED’s at all times.

“Dim” sets all of the front panel LEDs to a low brightness level when the Fathom IWS is turned on.

“On” sets all of the front panel LEDs to full brightness level when the Fathom IWS is turned on.

IMPORTANT: WHEN TROUBLESHOOTING OR CALIBRATING THE A.R.O. FEATURE, MAKE SURE THAT THE “LIGHTS” SWITCH IS SET TO “DIM” or “ON.”

LP Filter

The Low Pass (LP) Filter selector switch determines the operating mode of the Fathom IWS’s built-in low pass filter.

“Off” defeats the low pass filter, completely removing this circuit from the signal path.

“12 dB” sets the roll off slope of the low pass filter to a 12 dB per octave slope (Butterworth alignment).

“24 dB” sets the roll off slope of the low pass filter to a 24 dB per octave slope (Linkwitz-Riley alignment).

The 24 dB setting more aggressively attenuates high frequencies above the LP Frequency setting (see below). If you are using the Fathom IWS’s built-in low pass filter, experiment with the LP Filter slope setting to achieve the best transition to your satellite speakers. If you prefer to use the filters and bass management features in your receiver or preamplifier, defeat the on-board filter by selecting the “Off” position.

If the Fathom IWS enclosure is placed close to the listening position, it may be very easy to localize the sub’s output. Experiment with the low pass filter to make the subwoofer less easy to localize.

LP Freq

The Low Pass (LP) Frequency selector knob allows the user to choose the roll-off frequency of the Fathom IWS’s internal low pass filter. The frequency is variable between 30 Hz (full counter-clockwise) to 130 Hz (full clockwise). This knob does not affect the input signal in any way if the LP Filter switch is set to “Off”. 80 Hz is a commonly used filter frequency and usually serves as a good starting point for adjustments.

IMPORTANT

Page 14

Fathom IWS

Page 13 Page 15
Image 14
Page 13 Page 15
Contents IWS-SYS-1 IWS-SYS-2 Important Safety Instructions Risk of Electric Shock Do not OpenFathom IWS Table of Contents IntroductionProduct Overview Placing Your Fathom IWS Cabinets in Your Listening Room Best Seating Positions Most accurate bass performanceRack Ears End Covers Using Two Fathom IWS Enclosures Recommended Subwoofer Placement Options for Four Fathom IWSs Rear Controls and Connectors Front Control PanelFront Panel Controls in Detail Power SwitchPower switch has three positions Automatic Room Optimization A.R.ODemo Button Input Mode IndicatorsLevel Mode Defeat ButtonLP Filter Master Level KnobLights LP FreqPolarity PhaseF. Trim Balanced Inputs Technical NotesUnbalanced Inputs RCA-type connection Tip PositiveMaster / Slave Switch Input Mode SwitchesGrounded / Isolated Switch IEC-Style AC Connector Output to Slave ConnectorOutput to Slave connector is designed to be used as follows Fathom Rear Controls Master Fathom Rear Controls Master Fathom Rear Controls Slave Stereo Active Crossover Balanced Outputs Fathom IWS On your Home Theater Receiver or Preamp/Processor Recommended Setup ProceduresPreparation for Setup Process On your Active Crossover or Bass Management ProcessorOn the Fathom IWS’s Front Panel Recommended Setup Procedures Subwoofer System SetupFathom IWS Polarity and Phase Adjustment Extreme Low Frequency e.l.f. TrimFrequently Asked Questions Is the Fathom IWS magnetically shielded?Troubleshooting For Service Information in the U.S.A. please call Limited Warranty / Service InformationIf you need service on your JL Audio product International WarrantiesFeatures

IWS-SYS-1, IWS-SYS-2 specifications

JL Audio has made a significant mark in the audio industry with its innovative products, particularly in the realm of marine and automotive sound systems. Among their diverse range of offerings, the IWS-SYS-2 and IWS-SYS-1 stand out as exceptional choices for esteemed audio enthusiasts seeking quality audio performance in unique environments.

The IWS-SYS-2 is engineered for those who demand powerful sound without sacrificing design. It features dual 8-inch subwoofers with a carefully crafted enclosure that effectively enhances low-frequency response. The system is built using robust materials that ensure durability and longevity, especially in marine applications where moisture and salt can wreak havoc on less-prominent audio equipment.

One of the hallmarks of the IWS-SYS-2 is its innovative media technology enhancement. This system employs JL Audio's proprietary, advanced signal processing that optimizes audio performance by ensuring crisp highs and thunderous lows, while minimizing distortion even at peak volume levels. Furthermore, the system includes customizable settings to accommodate various listening environments, making it an adaptable choice for diverse applications.

On the other hand, the IWS-SYS-1 focuses on providing a simpler, yet equally impressive audio experience. It features a single 8-inch subwoofer that delivers rich bass response and clarity. This system is ideal for those who want to introduce high-quality audio to smaller spaces without overwhelming them with subwoofer power. The IWS-SYS-1 also boasts a user-friendly installation process that makes it accessible for both professionals and DIY enthusiasts alike.

Both models are designed with marine-grade components, providing resistance against corrosion and environmental challenges that are common in boating and harsh weather conditions. The weather-resistant finish and UV-protected materials ensure that aesthetics remain intact without compromising sound quality.

Overall, the JL Audio IWS-SYS-2 and IWS-SYS-1 are impressive entries in the realm of marine audio solutions. With their respective strengths in sound performance, design, and resilience, these systems exemplify JL Audio's commitment to delivering exceptional audio experiences. Whether you opt for the robust full-power capabilities of the IWS-SYS-2 or the streamlined elegance of the IWS-SYS-1, both systems promise to elevate your sonic adventures to new heights.
Top Page Image Contents