JL Audio IWS-SYS-2, IWS-SYS-1 owner manual Placing Your Fathom IWS Cabinets in Your Listening Room

Page 6

PLACING YOUR Fathom IWS Cabinets IN YOUR LISTENING ROOM:

Your listening room or theater is an integral part of your sound reproduction system. The physical dimensions of the room and its furnishings, materials, doors and windows play an important role in defining how your system sounds.

When you place a sound source in an enclosed rectangular space, “standing waves” are created, resulting from the relationship between the sound’s wavelength and your room’s dimensions. In other words, standing waves result from sound energy that is trapped in the room as it bounces back and forth between opposing walls. Standing waves in the room create acoustic peaks and dips where the sound is either louder or softer, based solely on your physical position in the room. Energy also “builds up” at the room’s boundaries, creating exaggerated bass response at certain frequencies. These fundamental room resonances are called room “modes.”

The moral of this mode story is to try and avoid seating positions in standing wave peak or dip regions. It is highly recommended that you place your listening chairs in areas where modal peaks and dips are moderate and do not reinforce one another. The two most obvious areas to avoid are those near the exact center of the room and those close to any of the room’s walls.

Just as your listening seat can be in a peak or dip region, so can your subwoofer. When placed in a room corner, a subwoofer maximally excites the room’s mode structure, creating the strongest output with the fewest dips. When the subwoofer is pulled away from a corner or wall, the room modes are excited less, which can alter the sound at your listening seat.

Be sure to experiment with both your listening seat position and subwoofer position to find the best solution. Careful experimentation usually leads to a superior sounding system. Use our setup suggestions (illustrated on the opposing page and the following pages) to get you started.

If you cannot avoid placing your sofa against the back wall or your subwoofer in a less than optimal position, all is not lost. Your Fathom IWS’s Automatic Room Optimization (A.R.O.) System can dramatically improve these less-than-ideal situations.

We recommend that you begin by placing your Fathom IWS enclosure in the front of the room, near the front left or right speaker, but not directly in the corner of the room. Because the IWS enclosures are built into the walls, you cannot move them later if the corner-loaded bass turns out to be too strong. Please refer to the following illustrations for further placement ideas.

We recommend that you avoid placing the Fathom IWS enclosures near windows to prevent rattling and sound transmission to the outside world.

If you are planning to install your Fathom IWS amplifier inside a cabinet, please refer to the guidelines on page 8.

Page 6

Fathom IWS

Image 6
Contents IWS-SYS-1 IWS-SYS-2 Important Safety Instructions Risk of Electric Shock Do not OpenFathom IWS Table of Contents IntroductionProduct Overview Placing Your Fathom IWS Cabinets in Your Listening Room Best Seating Positions Most accurate bass performanceRack Ears End Covers Using Two Fathom IWS Enclosures Recommended Subwoofer Placement Options for Four Fathom IWSs Rear Controls and Connectors Front Control PanelFront Panel Controls in Detail Power SwitchPower switch has three positions Automatic Room Optimization A.R.ODemo Button Input Mode IndicatorsLevel Mode Defeat ButtonLP Filter Master Level KnobLights LP FreqPhase F. TrimPolarity Balanced Inputs Technical NotesUnbalanced Inputs RCA-type connection Tip PositiveInput Mode Switches Grounded / Isolated SwitchMaster / Slave Switch Output to Slave Connector Output to Slave connector is designed to be used as followsIEC-Style AC Connector Fathom Rear Controls Master Fathom Rear Controls Master Fathom Rear Controls Slave Stereo Active Crossover Balanced Outputs Fathom IWS On your Home Theater Receiver or Preamp/Processor Recommended Setup ProceduresPreparation for Setup Process On your Active Crossover or Bass Management ProcessorOn the Fathom IWS’s Front Panel Recommended Setup Procedures Subwoofer System SetupFathom IWS Polarity and Phase Adjustment Extreme Low Frequency e.l.f. TrimFrequently Asked Questions Is the Fathom IWS magnetically shielded?Troubleshooting For Service Information in the U.S.A. please call Limited Warranty / Service InformationIf you need service on your JL Audio product International WarrantiesFeatures

IWS-SYS-1, IWS-SYS-2 specifications

JL Audio has made a significant mark in the audio industry with its innovative products, particularly in the realm of marine and automotive sound systems. Among their diverse range of offerings, the IWS-SYS-2 and IWS-SYS-1 stand out as exceptional choices for esteemed audio enthusiasts seeking quality audio performance in unique environments.

The IWS-SYS-2 is engineered for those who demand powerful sound without sacrificing design. It features dual 8-inch subwoofers with a carefully crafted enclosure that effectively enhances low-frequency response. The system is built using robust materials that ensure durability and longevity, especially in marine applications where moisture and salt can wreak havoc on less-prominent audio equipment.

One of the hallmarks of the IWS-SYS-2 is its innovative media technology enhancement. This system employs JL Audio's proprietary, advanced signal processing that optimizes audio performance by ensuring crisp highs and thunderous lows, while minimizing distortion even at peak volume levels. Furthermore, the system includes customizable settings to accommodate various listening environments, making it an adaptable choice for diverse applications.

On the other hand, the IWS-SYS-1 focuses on providing a simpler, yet equally impressive audio experience. It features a single 8-inch subwoofer that delivers rich bass response and clarity. This system is ideal for those who want to introduce high-quality audio to smaller spaces without overwhelming them with subwoofer power. The IWS-SYS-1 also boasts a user-friendly installation process that makes it accessible for both professionals and DIY enthusiasts alike.

Both models are designed with marine-grade components, providing resistance against corrosion and environmental challenges that are common in boating and harsh weather conditions. The weather-resistant finish and UV-protected materials ensure that aesthetics remain intact without compromising sound quality.

Overall, the JL Audio IWS-SYS-2 and IWS-SYS-1 are impressive entries in the realm of marine audio solutions. With their respective strengths in sound performance, design, and resilience, these systems exemplify JL Audio's commitment to delivering exceptional audio experiences. Whether you opt for the robust full-power capabilities of the IWS-SYS-2 or the streamlined elegance of the IWS-SYS-1, both systems promise to elevate your sonic adventures to new heights.