JL Audio IWS-SYS-2, IWS-SYS-1 owner manual Features

Page 32

FEATURES

Unbalanced Inputs:

Stereo or Mono (two RCA jacks - Input Impedance of 10k Ohms)

Balanced Inputs:

Stereo or Mono (two female XLR jacks - Input Impedance of 10k Ohms)

Output To Slave:

Balanced (one male XLR jack)

Input Modes:

Master or Slave

Level Modes:

Reference (fixed gain) or Variable from full mute to +15dB over reference gain

Power Modes:

Off, On or Automatic Signal-Sensing

Light Modes:

Off, On or Dim

Low Pass Filter Mode:

Off, 12 dB per octave or 24 dB per octave

Low Pass Filter Cutoff Frequency: Variable from 30 Hz – 130 Hz

Polarity:

0 or 180 degrees

Phase:

Variable from 0 – 270 degrees

E.L.F. Trim:

Variable from –12 dB to +3 dB at 23 Hz

Automatic Room Optimization (A.R.O.)

with included laboratory-grade calibration microphone, defeatable.

T O P

V I E W

B A C K

P A N E L

F R O N T

P A N E L

Specifications

IWS-SYS-1

IWS-SYS-2

Fathom IWS home subwoofer

Fathom IWS home subwoofer

 

 

 

 

Enclosure Type:

Single Sealed Enclosure

Two Sealed Enclosures

 

 

 

Driver(s):

13.5-inch

13.5-inch (nominal diameter)

(nominal diameter)

in each of two enclosures

 

 

 

 

Frequency Response (anechoic):

26 Hz - 101 Hz (+/- 1.5 dB)

26 Hz - 101 Hz (+/- 1.5 dB)

-3dB at 25 Hz / 112 Hz

-3dB at 25 Hz / 112 Hz

 

-10dB at 22 Hz / 150 Hz

-10dB at 22 Hz / 150 Hz

 

 

 

Effective Piston Area:

98.26 sq. in. / 0.0634 sq. m.

196.51 sq. in. / 0.1268 sq. m.

 

 

 

Effective Displacement:

147.3 cu. in. (2.41 liters)

294.6 cu. in. (4.82 liters)

 

 

 

Amplifier Power:

1000 watts RMS short-term

2000 watts RMS short-term

 

 

 

Grille Dimensions: (H) Height x (W) Width x (D) Depth

17.25 inches x 20 inches

438 mm x 508 mm

 

 

 

Wall Opening Dimensions: (W) Width x (H) Height

14.5 inches x 17.25 inches

368 mm x 438 mm

 

 

 

Amplifier Dimensions: (H) Height x (W) Width x (D) Depth

3.5 in. x 17.4 in. x 17.9 in.

Height Dimensions DO NOT include feet.

89 mm x 442 mm x 455 mm

 

 

 

Amplifier Net Weight:

35 lbs. (15.9 kg)

43 lbs. (19.5 kg)

 

 

 

Cabinet Finish:

Black Texture-Coated

Black Texture-Coated

 

 

 

Grille Finish:

White (paintable)

 

 

 

“JL Audio”, “Fathom IWS” and the JL Audio logo are registered trademarks of JL Audio, Inc., “Ahead of the Curve” is a trademark of JL Audio, Inc. Due to continuous product development, all specifications are subject to change without notice.

Printed in USA • ©2010 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. For more detailed information please visit us online at www.jlaudio.com.

10369 North Commerce Parkway • Miramar, Florida • 33025 • USA

SKU-011310-04-2010

W A L L O P E N I N G

Image 32
Contents IWS-SYS-1 IWS-SYS-2 Important Safety Instructions Risk of Electric Shock Do not OpenFathom IWS Table of Contents IntroductionProduct Overview Placing Your Fathom IWS Cabinets in Your Listening Room Best Seating Positions Most accurate bass performanceRack Ears End Covers Using Two Fathom IWS Enclosures Recommended Subwoofer Placement Options for Four Fathom IWSs Rear Controls and Connectors Front Control PanelPower Switch Power switch has three positionsFront Panel Controls in Detail Automatic Room Optimization A.R.OInput Mode Indicators Level ModeDemo Button Defeat ButtonMaster Level Knob LightsLP Filter LP FreqPolarity PhaseF. Trim Balanced Inputs Technical NotesUnbalanced Inputs RCA-type connection Tip PositiveMaster / Slave Switch Input Mode SwitchesGrounded / Isolated Switch IEC-Style AC Connector Output to Slave ConnectorOutput to Slave connector is designed to be used as follows Fathom Rear Controls Master Fathom Rear Controls Master Fathom Rear Controls Slave Stereo Active Crossover Balanced Outputs Fathom IWS Recommended Setup Procedures Preparation for Setup ProcessOn your Home Theater Receiver or Preamp/Processor On your Active Crossover or Bass Management ProcessorOn the Fathom IWS’s Front Panel Recommended Setup Procedures Subwoofer System SetupFathom IWS Polarity and Phase Adjustment Extreme Low Frequency e.l.f. TrimFrequently Asked Questions Is the Fathom IWS magnetically shielded?Troubleshooting Limited Warranty / Service Information If you need service on your JL Audio productFor Service Information in the U.S.A. please call International WarrantiesFeatures

IWS-SYS-1, IWS-SYS-2 specifications

JL Audio has made a significant mark in the audio industry with its innovative products, particularly in the realm of marine and automotive sound systems. Among their diverse range of offerings, the IWS-SYS-2 and IWS-SYS-1 stand out as exceptional choices for esteemed audio enthusiasts seeking quality audio performance in unique environments.

The IWS-SYS-2 is engineered for those who demand powerful sound without sacrificing design. It features dual 8-inch subwoofers with a carefully crafted enclosure that effectively enhances low-frequency response. The system is built using robust materials that ensure durability and longevity, especially in marine applications where moisture and salt can wreak havoc on less-prominent audio equipment.

One of the hallmarks of the IWS-SYS-2 is its innovative media technology enhancement. This system employs JL Audio's proprietary, advanced signal processing that optimizes audio performance by ensuring crisp highs and thunderous lows, while minimizing distortion even at peak volume levels. Furthermore, the system includes customizable settings to accommodate various listening environments, making it an adaptable choice for diverse applications.

On the other hand, the IWS-SYS-1 focuses on providing a simpler, yet equally impressive audio experience. It features a single 8-inch subwoofer that delivers rich bass response and clarity. This system is ideal for those who want to introduce high-quality audio to smaller spaces without overwhelming them with subwoofer power. The IWS-SYS-1 also boasts a user-friendly installation process that makes it accessible for both professionals and DIY enthusiasts alike.

Both models are designed with marine-grade components, providing resistance against corrosion and environmental challenges that are common in boating and harsh weather conditions. The weather-resistant finish and UV-protected materials ensure that aesthetics remain intact without compromising sound quality.

Overall, the JL Audio IWS-SYS-2 and IWS-SYS-1 are impressive entries in the realm of marine audio solutions. With their respective strengths in sound performance, design, and resilience, these systems exemplify JL Audio's commitment to delivering exceptional audio experiences. Whether you opt for the robust full-power capabilities of the IWS-SYS-2 or the streamlined elegance of the IWS-SYS-1, both systems promise to elevate your sonic adventures to new heights.