SIZE AND CAPACITY OF PROPANE
CYLINDERS REQUIRED
The charts below show the approximate size of the cylinder required for these heaters. To use the chart:
1.Select the lowest air temperature expected (at the bottom of the chart).
2.Move straight up to time of operation desired (left side of chart).
3.Read the cylinder size required.
All heaters should have: | full cylinders |
| good air circulation |
| no frost on cylinders |
BTU'S PER HOUR REQUIRED
WARRANTY
We are pleased that you have selected our product and take this opportunity to assure you that qualified service facilities are available if required. With the cooperation of independent dealers,
a nationwide network of authorized servicing dealers is available for your servicing requirements.
Should your product require servicing, read the section of the manual entitled “Servicing”.
Who gets the warranty? The warranty is limited to the consumer who originally purchases the product.
What is covered? This limited warranty covers all imperfections in workmanship and material.
What is not covered? This limited warranty does not cover damage resulting from accident, misuse or abuse, lack of proper maintenance, affixing of any attachments not provided with the products, or loss of parts. IN NO EVENT SHALL ENERCO TECHNICAL PRODUCTS BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES NOR FOR ANY DAMAGES RESULTING FROM MISUSE OR MODIFICATION OF THIS PRODUCT.
Enerco Group, Inc. Forced Air Propane Construction Heater | 7 | Operating Instructions and Owner’s Manual |