Toshiba WT8-B, WT10-A user manual Connecting your tablet to the Keyboard, Charging the Keyboard

To charge the Keyboard, you can use the provided AC adaptor and Micro- USB cable. Please follow the steps as detailed below to charge the Keyboard:

1.Plug the USB connector of the Micro-USB cable into the AC adaptor.

2.Plug the the smaller connector of the Micro-USB cable into the Micro- USB port on your Keyboard.

Figure 4-10 Charging the Keyboard

2-pin

3-pin

Product appearance depends on the model you purchased.

3.Plug the AC adaptor into a live wall outlet. A full charge takes about 3 hours.

If you are not going to use the Keyboard for a long period of time, turn it off to conserve power.

Connecting your tablet to the Keyboard

Before you start using the Keyboard, it is neccessary to do Bluetooth pairing.This is required for the first time and after that, the system will remember this keyboard until manually unpaired.

You may follow the steps as detailed below to do the pairing:

1.On the Keyboard, slide the Power switch to the Bluetooth position for one second and release, the Bluetooth indicator starts blinking white for pairing.

2.On your tablet, swipe in from the right edge of your screen on the desktop to open charms, and then tap Settings -> Change PC settings -> PC and devices -> Bluetooth.

The Bluetooth function on your tablet is enabled by default. Your tablet will just start scanning available Bluetooth devices, and you will see a list of available Bluetooth devices for connection.

3.Tap the device named Bluetooth Keyboard, a Bluetooth pairing request window will pop up. Follow the on-screen instructions to complete pairing. You will see Bluetooth Keyboard as connected after the pairing has been successfully completed.

Now the Keyboard is ready for use.

User's Manual 4-17