Dynaudio BM10S manual Corner placement, Free standing, away from wall and corner

Page 16

POSITIONING THE SUBWOOFER

Fig. 8

Generally, avoid placing the subwoofer at ¼, ½ or ¾ of either the length or width of the room as at these locations the room-modes are likely to be strongest (the dashed lines in fig. 8)

Fig. 9

Corner placement

Maximum boost of bass level but potentially uneven distribution of bass in the room (room-modes), particularly if the room is square or shoe-box shaped.

From the listening position, check if the bass is even across the entire bass spectrum. If not, move the subwoofer out of the corner. Try moving it along either wall.

Fig. 10

Next to the wall - away from the corner

This position still provides considerable boost but less than the corner placement as above. Room-modes can also still be considerable but less so than with corner placement.

From the listening position, check if the bass is even across the entire bass spectrum. If not, move the subwoofer away or towards your listening position until most even response has been obtained.

Avoid placing the subwoofer exactly half-way or at a quarter of the wall's length (refer to fig. 8).

Free standing, away from wall and corner

Fig. 11

This position will give least boost compared to wall or cor- ner placement, but in general offers best flexibility at achieving most even bass distribution at the listening posi- tion.

Avoid placing the subwoofer exactly half-way or at a quar- ter's length of either sidewall (refer to fig. 8).

Particularly in smaller square or "shoe-box" shaped rooms the free standing position is recommended.

14

Image 16
Contents Page Page Important Safety Instructions Voltage Line plug according to standardAdvice on maintenance and care Maintenance / CareAbout Wood Veneer Finishes Certificate Of ConformityTable of Contents Features IntroductionCongratulations DynaudioInstalling Quick Setup GuideUsing Installation & Connections Check that the contents are completeUnpacking Making connectionsBack Panel Setting UP & Tuning Master and Slave modeSingle subwoofer connection Multiple Subwoofer connectionConnecting using the XLR sockets Remote Control battery & battery replacementAutomatic Mode for On/Standby Back to Automatic mode Temporary Manual Mode for On/StandbySubwoofer Level control Setting Phase Setting the Cross-over FrequencyStoring and recalling presets To store a presetPositioning the Subwoofer To recall a PresetIntroduction Corner placement Free standing, away from wall and cornerFinding the Optimal Settings Finding the correct settingsMultiple subwoofers LevelFinding Optimal Settings Phase Finding optimal Phase SettingsTroubleshooting Problem Cause SolutionFactory Defaults Factory Default settingsFactory default settings are as follows To reinstate the factory default settingsTechnical Specifications Technical Specifications for BM10S

BM10S specifications

The Dynaudio BM10S is a standout subwoofer known for its exceptional sound quality and precision, making it an ideal choice for professionals in music production, film scoring, and broadcasting. As a part of the Dynaudio BM series, the BM10S has been designed to provide a seamless integration with the company's studio monitors, delivering an accurate low-frequency response that enhances overall audio performance.

One of the main features of the BM10S is its powerful 10-inch driver. This driver is engineered to produce deep bass sounds with clarity and control. The subwoofer can handle a frequency range starting from 27 Hz, allowing it to reproduce low-end frequencies effectively while maintaining a linear response. This capability is crucial in professional settings where every detail of the sound is essential, ensuring that low frequencies do not mask other vital elements in the mix.

Equipped with a built-in multi-amplification system, the BM10S features a 200-watt RMS power output. This ample power ensures that the subwoofer is capable of delivering both burst and sustained low frequencies without distortion. The intelligent design allows it to adapt to various monitoring environments, making it versatile enough for different studio setups.

The BM10S utilizes advanced DSP (digital signal processing) technology to enhance its performance further. This includes customizable EQ settings, allowing users to tailor the subwoofer’s response to fit their specific room acoustics. The ability to adjust crossover frequencies helps in blending the subwoofer seamlessly with Dynaudio monitors, offering an extended low-end presence without compromising the mid and high frequencies.

Another notable characteristic of the Dynaudio BM10S is its robust build quality. The cabinet is constructed from high-grade MDF, which minimizes resonance and vibration, ensuring that sound output remains clear and uncolored. The sleek design not only contributes to its aesthetic appeal but also ensures a practical fit in various studio environments.

In summary, the Dynaudio BM10S is a professional-grade subwoofer that boasts advanced technologies, solid performance specifications, and an elegant design. With its powerful driver, built-in amplification, and digital signal processing capabilities, it stands out as an essential tool for audio professionals seeking to achieve precision in their sound production. Whether for music mixing or multimedia applications, the BM10S meets the demands of the most discerning users.