Finding Optimal Settings

frequency response; see fig. 13. In the same manner, with the cross-over frequency for the main speakers set too low (cross-over freq. for the subwoofer too high), there will be too much of an overlap between subwoofer and main speakers, again resulting in incorrect overall frequency response; see fig. 14. Correct settings are illustrated in fig. 15.

Fig. 13

Subwoofer cross-over frequency set too high (main speakers too low): Bump in frequency response.

Fig. 15

Subwoofer & main speakers cross-over frequencies set correctly: Smooth frequency response.

Many multi-channel processors and receivers provide elaborate bass-management systems where the cross-over frequency for both subwoofer and main speakers can be set. If you are using such a bass-management system, you can select the "Flat" setting on the subwoofers remote control, as all filtering has been done by the bass- management system. Carefully follow the instructions for the amplifier/processor or receiver.

Fig. 14

Subwoofer cross-over frequency too low (main speakers too high): Gap in frequency response

• If you are using your system's bass-management system, ensure that the subwoofers cross-over frequency hasn't been set to the same or lower frequency compared to the setting chosen with the bass management system.

•Selecting the correct frequency depends to a large extend on the main speakers. Sometimes main speakers are specifically intended to work with a subwoofer. In such cases, the main speakers can get damaged by a full-range amplifier signal. If in doubt, check the instruction manual for the main speakers for any restrictions or recommendations.

Of course it is possible to combine the subwoofer in a system where the loudspeakers are being fed with a full- range signal. In that case, setting the cross-over frequency for the subwoofer depends very much on the natural roll-off frequency in the bass of the main speakers. In general, a large, floor-standing speaker will still have significant Output in the deeper bass range, in which case the cross- over frequency should be set to 60Hz. A small or very small speaker will have less deep bass Output in which case the setting should be 80Hz. or 100Hz. To find the correct setting in such scenarios:

•Play a music track that has a significant amount of bass over a large bass region. An instrument such as a double-bass or bass-guitar is very suitable. Starting with the "60" Hz position (first button left in row No. 3 in fig. 6), use this track to set the subwoofers relative volume level.

BM10S specifications

The Dynaudio BM10S is a standout subwoofer known for its exceptional sound quality and precision, making it an ideal choice for professionals in music production, film scoring, and broadcasting. As a part of the Dynaudio BM series, the BM10S has been designed to provide a seamless integration with the company's studio monitors, delivering an accurate low-frequency response that enhances overall audio performance.

One of the main features of the BM10S is its powerful 10-inch driver. This driver is engineered to produce deep bass sounds with clarity and control. The subwoofer can handle a frequency range starting from 27 Hz, allowing it to reproduce low-end frequencies effectively while maintaining a linear response. This capability is crucial in professional settings where every detail of the sound is essential, ensuring that low frequencies do not mask other vital elements in the mix.

Equipped with a built-in multi-amplification system, the BM10S features a 200-watt RMS power output. This ample power ensures that the subwoofer is capable of delivering both burst and sustained low frequencies without distortion. The intelligent design allows it to adapt to various monitoring environments, making it versatile enough for different studio setups.

The BM10S utilizes advanced DSP (digital signal processing) technology to enhance its performance further. This includes customizable EQ settings, allowing users to tailor the subwoofer’s response to fit their specific room acoustics. The ability to adjust crossover frequencies helps in blending the subwoofer seamlessly with Dynaudio monitors, offering an extended low-end presence without compromising the mid and high frequencies.

Another notable characteristic of the Dynaudio BM10S is its robust build quality. The cabinet is constructed from high-grade MDF, which minimizes resonance and vibration, ensuring that sound output remains clear and uncolored. The sleek design not only contributes to its aesthetic appeal but also ensures a practical fit in various studio environments.

In summary, the Dynaudio BM10S is a professional-grade subwoofer that boasts advanced technologies, solid performance specifications, and an elegant design. With its powerful driver, built-in amplification, and digital signal processing capabilities, it stands out as an essential tool for audio professionals seeking to achieve precision in their sound production. Whether for music mixing or multimedia applications, the BM10S meets the demands of the most discerning users.