Dynaudio BM10S manual Installation & Connections, Unpacking, Check that the contents are complete

Page 8

INSTALLATION & CONNECTIONS

Unpacking

Due to its weight and size, we strongly recommend that help is at hand when unpacking and installing the subwoofer. Unpack the subwoofer on a clean, even and soft area; floor carpeting is very suitable. Please refer to Fig. 1.

•The packaging should be opened from the top. Remove all accessories that come packed with the subwoofer, such as AC power cord, remote control and warranty card). Do not remove the top part of the protective material.

•With the protective material still in place but with accessories removed, carefully tilt the packaging on its side and tilt again to turn it upside-down. Ensure that no part of the top-cover is obstructing the opening at the top.

•The outer packaging can now be lifted away from the subwoofer itself. Remove the protective material that now is on top. Through the polythene bag you can now see the underside of the subwoofer.

•Open the polythene bag and remove from around the base of the subwoofer.

•Again, carefully tilt the subwoofer on its side and again to turn it onto its feet. Note that the top part of the protective material will now come off easily so ensure that the subwoofer doesn't drop or slide away in the process.

Check that the contents are complete:

•Subwoofer. The factory-set power requirements (refer to label on rear of subwoofer) should correspond for the region where the subwoofer was purchased. Refer also to chapter "Safety Instructions".

•DSC1 Remote Control.

•AC mains lead. The supplied lead should be suitable for the region where the subwoofer was purchased.

•Instruction Manual.

To decide on the most suitable location for the subwoofer, please refer to chapter "Positioning Subwoofers". Once the subwoofer is positioned in the listening room, it can be connected to the rest of the system.

Making connections

Before making any connections to the subwoofer we strongly recommend that the subwoofer is disconnected from the mains outlet. Refer to figure 2.

1

2

3

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Page Important Safety Instructions Voltage Line plug according to standardAdvice on maintenance and care Maintenance / CareAbout Wood Veneer Finishes Certificate Of ConformityTable of Contents Features IntroductionCongratulations DynaudioUsing Quick Setup GuideInstalling Installation & Connections Check that the contents are completeUnpacking Making connectionsBack Panel Setting UP & Tuning Master and Slave modeSingle subwoofer connection Multiple Subwoofer connectionConnecting using the XLR sockets Remote Control battery & battery replacementAutomatic Mode for On/Standby Subwoofer Level control Temporary Manual Mode for On/StandbyBack to Automatic mode Setting Phase Setting the Cross-over FrequencyStoring and recalling presets To store a presetIntroduction To recall a PresetPositioning the Subwoofer Corner placement Free standing, away from wall and cornerFinding the Optimal Settings Finding the correct settingsMultiple subwoofers LevelFinding Optimal Settings Phase Finding optimal Phase SettingsTroubleshooting Problem Cause SolutionFactory Defaults Factory Default settingsFactory default settings are as follows To reinstate the factory default settingsTechnical Specifications Technical Specifications for BM10S

BM10S specifications

The Dynaudio BM10S is a standout subwoofer known for its exceptional sound quality and precision, making it an ideal choice for professionals in music production, film scoring, and broadcasting. As a part of the Dynaudio BM series, the BM10S has been designed to provide a seamless integration with the company's studio monitors, delivering an accurate low-frequency response that enhances overall audio performance.

One of the main features of the BM10S is its powerful 10-inch driver. This driver is engineered to produce deep bass sounds with clarity and control. The subwoofer can handle a frequency range starting from 27 Hz, allowing it to reproduce low-end frequencies effectively while maintaining a linear response. This capability is crucial in professional settings where every detail of the sound is essential, ensuring that low frequencies do not mask other vital elements in the mix.

Equipped with a built-in multi-amplification system, the BM10S features a 200-watt RMS power output. This ample power ensures that the subwoofer is capable of delivering both burst and sustained low frequencies without distortion. The intelligent design allows it to adapt to various monitoring environments, making it versatile enough for different studio setups.

The BM10S utilizes advanced DSP (digital signal processing) technology to enhance its performance further. This includes customizable EQ settings, allowing users to tailor the subwoofer’s response to fit their specific room acoustics. The ability to adjust crossover frequencies helps in blending the subwoofer seamlessly with Dynaudio monitors, offering an extended low-end presence without compromising the mid and high frequencies.

Another notable characteristic of the Dynaudio BM10S is its robust build quality. The cabinet is constructed from high-grade MDF, which minimizes resonance and vibration, ensuring that sound output remains clear and uncolored. The sleek design not only contributes to its aesthetic appeal but also ensures a practical fit in various studio environments.

In summary, the Dynaudio BM10S is a professional-grade subwoofer that boasts advanced technologies, solid performance specifications, and an elegant design. With its powerful driver, built-in amplification, and digital signal processing capabilities, it stands out as an essential tool for audio professionals seeking to achieve precision in their sound production. Whether for music mixing or multimedia applications, the BM10S meets the demands of the most discerning users.
Top Page Image Contents