Toshiba W30DT-A-100 user manual Settings for display video on Hdmi

2.Plug the other end of the HDMI cable into the micro HDMI port on your computer.

Figure 4-5 Connecting the HDMI port on the computer

2

1

1. Micro HDMI port 2. HDMI cable (Type D connector)

Please do not plug/unplug an HDMI display device under the following conditions:

The system is starting up. The system is shutting down.

When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI.

When you unplug the HDMI cable and re-plug it, please wait at least 5 seconds before you re-plug the HDMI cable again.

When you change the display output device, the playback device may not switch automatically. In this case, in order to set the playback device to the same device as the display output device, please adjust the playback device manually by the following steps:

1.Click Desktop -> Desktop Assist -> Control Panel -> Hardware and Sound -> Sound.

2.In the Playback tab, select the playback device which you want to switch to.

3.To use the internal speakers on your computer, select Speakers. To use the television or the external monitor that you have connected to the computer, select a different playback device.

4.Click the Set Default button.

5.Click OK to close the Sound dialog.

Settings for display video on HDMI

To view video on the HDMI display device, be sure to configure the following settings otherwise you may find that nothing is displayed.

Be sure to use the function key to select the display device before starting to play video. Do not change the display device while playing video.

Do not change the display device under the following conditions.

User's Manual 4-15