Toshiba W30DT-A-100 Toshiba System Settings, Starting the computer using a password, Password=

Register or delete the Supervisor Password.

Specify restrictions for general users.

Starting the computer using a password

If you have already registered a user password, there is one way to start the computer:

Enter the password manually.

The password is necessary only if the computer was shut down in Hibernation mode or boot mode. It is not needed in Sleep mode and Restart.

To enter a password manually, follow the steps as detailed below:

1.Turn on the power as described in the Getting Started section. The following message will appear in the screen:

Password=

At this point, the function keys do not work. They will function after you enter the password.

2.Enter the Password.

3.Press ENTER.

If you enter the password incorrectly three times in a row, or if you don’t enter the password within 1 minute, the computer shuts off. In this case, some features that can power on the computer automatically (Wake-up on LAN, Task Scheduler, etc) may not work. You must turn the computer back on to retry password entry.

TOSHIBA System Settings

TOSHIBA System Settings is the TOSHIBA configuration management tool available through the Windows operating system.

To run TOSHIBA System Settings, click Desktop -> Desktop Assist -> Tools & Utilities -> System Settings.

The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured.

In addition there are also three buttons: OK, Cancel and Apply.

OK	Accepts your changes and closes the TOSHIBA
	System Settings window.
Cancel	Closes the window without accepting your
	changes.
Apply	Accepts all your changes without closing the
	TOSHIBA System Settings window.

User's Manual 5-9