*Within concrete wall rooms such as basements or office buildings, the received signal may be weakened. Always place the unit near the window.
WEATHER FORECAST
The weather projection clock is capable to detect an atmospheric pressure changes. Based on collected data, it forecasts the weather for the next 12 to 24 hours.
When the |
|
|
| |
display |
|
|
| |
shows... |
|
|
| |
Forecast is... Sunny | Partly | Cloudy | Light Rain Heavy Rain | |
Cloudy | ||||
|
|
|
NOTE:
1.The weather forecast accuracy is approximately 70%.
2.Display shows forecasted, not current conditions.
3.The “Sunny” icon indicates clear weather, even when displayed during nighttime hours.
BAROMETRIC PRESSURE
The barometric pressure arrows indicate if pressure is rising, steady, or falling.
Arrow | TREND | TREND | TREND | |
|
|
| ||
indicator |
|
|
| |
Pressure | Rising | Steady | Falling | |
Trend | ||||
|
|
|
11
INDOOR ANR OUTDOOR TEMPERATURES
The trend indicator shows the trend of temperatures collected at a particular remote sight. There are three trends will be shown: rising, steady, and falling.
Arrow | TREND | TREND | TREND | |
|
|
| ||
indicator |
|
|
| |
Temperature | Rising | Steady | Falling | |
Trend | ||||
|
|
|
MAXIMUM AND MINIMUM TEMPERATURE
The maximum and minimum record of the indoor and outdoor temperature will be automatically stored in the memory. It will display the minimum, maximum and the current reading upon each press of both [channel] & [ – ] buttons, the unit will return to the current temperature display in 15 seconds.
To clear the memory, press & hold [channel] for 3 seconds and all stored readings will be erased.
LOST COMMUNICATION
If the main unit display for the remote sensor goes blank, press and hold [ – ] for 2 seconds to begin a new signal search. If the signal still isn’t received,
please make sure that:
1.The remote sensor is in its proper location.
2.The distance between the main and remote units is not over 100 feet.
3.The path between units is clear of obstacles. Shorten the distance between units if necessary.
4.Fresh batteries are installed correctly in both remote sensor and main unit.
Note: When the temperature falls below freezing, the batteries in outdoor remote sensor(s) may have reduced voltage supply and a shorter effective range. We recommend to Use
12