Toshiba 2405-S201 specifications To remove the optical disk drive, follow the steps below

Page 16

Satellite 2400 Series Disassembly Overview, cont.

" "

#

!

!

To remove the optical disk drive, follow the steps below.

1.Disconnect the optical disk drive (DVD) from PJ2001 on the system board.

2.Carefully slide the drive to the right to remove it.

3.Remove two M2x5 silver thin flat-head screws and the short metal brace.

4.Remove one M2x3 silver thin flat-head screw and the long metal brace.

To remove the FDD, follow the steps below.

1.Disconnect the FDD SUMI card from PJ2007 on the system board.

2.Lift out the FDD.

3.Remove four M2.5x2.6 screws securing the metal case to the FDD and remove the metal case.

4.Disconnect the FDD DUMI card from the connector of the FDD.

NOTE: Two types of SUMI cards are used; one manufactured by TEAC and SAMSUNG, and the other by MITSUMI.

Toshiba TRR

Page 16

7/02, Satellite

Image 16

Contents Weight 2400-S201 2400-S202 PS240U-00UMR72405-S201 2400-S202 PS240U-00UMRX PS240U-00UMR3Satellite 2400 Series Exploded 14 TFT Upper View Satellite 2400 Series Exploded 14 TFT Lower View Ref. # Code Description Satellite 2400 Series 14 TFT Part NumbersComments Satellite 2400 Series Part 14 TFT Numbers, Ref. # Code Description PIR CommentsCPU Stud Hexa StudCover Assy Cover SUB AssySatellite 2400 Series 15 Exploded Upper View Satellite 2400 Series Exploded 15 Upper View Satellite 2400 Series 15 TFT Part Numbers Satellite 2400 Series Part 15 TFT Numbers, LCD Cover Assy Sensor SW. MagnetBrake HINGE, Right Brake HINGE, LeftSatellite 2400 Series Disassembly Overview Satellite 2400 Series Disassembly Overview, Remove one M2.5x4 black flat-head screwRemove two M2x4 super flat screws securing the MDC Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-head Images on the nextRemove two M2.5x2.6 black flat-head screws Remove two M2.5x6 black screws and two M2.5x16 black screwsTo remove the optical disk drive, follow the steps below Lift out the HDD connector board Disconnect the touch pad Sumi card from CN1 on the touch padRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 2400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove two M2.5x6 tapping screws securing the metal plate Remove one M2.5x6 tapping screw securing the metal braceSatellite 2400 Series Interrupts / Memory Map Interrupt Level Assigned toPort address Device/function Satellite 2400 Series Input/Output Port AssignmentsVGA