Toshiba 2405-S201 specifications Disconnect the touch pad Sumi card from CN1 on the touch pad

Page 17

Satellite 2400 Series Disassembly Overview, cont.

To remove the touch pad, follow the steps below.

1. Disconnect the touch pad SUMI card from PJ2004 on the system board.

2. Remove one M2x5 silver thin flat-head screw securing the touch pad.

3. LIft out the touch pad.

4. Disconnect the touch pad SUMI card from CN1 on the touch pad.

!

To remove the battery board, follow the steps below.

1. Disconnect the battery cable from PJ8810.

2. Lift out the battery board.

3. Disconnect the battery cable from PJ8811 on the battery board, if neces- sary.

NOTE: On installation, be sure to route the battery cable under the battery board to avoid pinching the battery cable with the plastic cover.

!

To remove the HDD connector board, follow the steps below.

1. Remove two M2x5 silver thin flat-head screws securing the HDD connector board.

2. Carefully lift up the HDD connector board to disconnect it from PJ2000 on the system board.

3. Lift out the HDD connector board.

Toshiba TRR

Page 17

7/02, Satellite

Image 17

Contents 2400-S201 2400-S202 PS240U-00UMR7 Weight2405-S201 2400-S202 PS240U-00UMRX PS240U-00UMR3Satellite 2400 Series Exploded 14 TFT Upper View Satellite 2400 Series Exploded 14 TFT Lower View Comments Satellite 2400 Series 14 TFT Part NumbersRef. # Code Description Ref. # Code Description PIR Comments Satellite 2400 Series Part 14 TFT Numbers,Hexa Stud CPU StudCover Assy Cover SUB AssySatellite 2400 Series 15 Exploded Upper View Satellite 2400 Series Exploded 15 Upper View Satellite 2400 Series 15 TFT Part Numbers Satellite 2400 Series Part 15 TFT Numbers, Sensor SW. Magnet LCD Cover AssyBrake HINGE, Right Brake HINGE, LeftSatellite 2400 Series Disassembly Overview Remove one M2.5x4 black flat-head screw Satellite 2400 Series Disassembly Overview,Remove two M2x4 super flat screws securing the MDC Images on the next Thirteen M2.5x6 black flat-head Six M2.5x5 black flat-headRemove two M2.5x2.6 black flat-head screws Remove two M2.5x6 black screws and two M2.5x16 black screwsTo remove the optical disk drive, follow the steps below Disconnect the touch pad Sumi card from CN1 on the touch pad Lift out the HDD connector boardRemove the CD switch board from the front cover assembly One M2.5x6 One M2.5x14 Satellite 2400 Series Disassembly Overview, To remove the CPU, follow the steps below Images on the next Remove one M2.5x6 tapping screw securing the metal brace Remove two M2.5x6 tapping screws securing the metal plateInterrupt Level Assigned to Satellite 2400 Series Interrupts / Memory MapVGA Satellite 2400 Series Input/Output Port AssignmentsPort address Device/function