ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD
Rack
Rack
LCD keyboard drawer
Figure 3-3. Installing the LCD keyboard drawer into the rack.
3.2 How to Use the Slides with the KVT319A-WIDE
1.Attach the left and right mounting bracket to the rack’s 19" mounting rails.
2.Adjust the mounting bracket to fit your rack.
3.Install the (8) M6 screws and cup washers (included), but do not tighten them yet.
Rear side
Right bracket
Left bracket | Front side |
|
Figure 3-4. Attach the mounting brackets to the rails.
Page 12 |
|