Earthquake Sound 16IR user manual Specifications

Cinénova-IR16 Power Amplifier

Specifications

SPECIFICATIONS

• Number of channels	16 Channels
• Power rating per channel	75	Watts RMS
(4-Ohm stereo), all channels driven:
(4-Ohm bridged), 8 channels:	150	Watts RMS
(8-Ohm stereo), all channels driven:	50	Watts RMS
(8-Ohm bridged), 8 channels:	100	Watts RMS
• Frequency response:	20Hz - 20kHz at -0.3dB
• Total Harmonic Distortion - THD:		0.01%
• Input sensitivity (for rated output power):		200mV - 3V
• Input impedance		22 kÙ
Independent channels
Bus Input		70 kÙ
• Signal to noise ratio:		92dB
• AUTO OFF delay time:		12 minutes
• Crosstalk:		>86dB
• Slew rate:		50V/ìsec
• Gain:		29
• Damping Factor:	> 200 @ 8Ù
• Remote trigger voltage:	5.5 - 28 VDC

•Power requirement: 15 Amp 120VAC 60Hz / 10 Amp 220VAC 50Hz

•Fuse ratings:

Main power fuse:	115V,T15A/250V / 230,T10A/250V
Block fuse:	3 AG type, slow blow 5A/250V
• Weight	61.7 lbs / 28 kg
Net weight:
Gross weight:	66.1 lbs / 30 kg

•Dimensions

Face plate (W x D x H): 19” (482.6mm) x 0.47” (12mm) x 6.87” (174.5mm)

Mounting (W x H):18.37” (466.5mm) x 4” (101.5mm)

Chassis (W x D x H): 16.65” (423mm) x 17” (405mm) x 6.71” (170.5mm)

WC

DC

HC

	WM
HF	HM
	Cinénova
	IR16
	WF

FOR YOUR RECORDS

Date of purchase:	_________________________________
Serial number:	_________________________________
Authorized dealer name:	_________________________________
Dealer’s address:	_________________________________
	_________________________________
	_________________________________
Dealer’s phone number:	( _______ ) ________ - _____________

17