Front Panel Map
Front Panel
13 9 5 1
14 10 6 2
15 11 7 3
16 12 8 4
Cinénova16
IR
3 | 1 | 2 |
1Power/Standby Switch
This red colored LED indicates whether the amplifier is ON or OFF. When the amplifier is ON, this LED will be lit. Note: When using the rear 12V DC Trigger (page 11 - feature 11), this front switch must be turned OFF.
2Front Panel Power LED
This LED reflects the power status of the whole amplifier. Amplifier will not have any output unless this LED is ON.
Note: When using another device to turn on the Cinénova IR16 amplifier, this LED will come on when external device sends DC signal (between 5 and 28V DC) to the back of Trigger connector (page 11 - feature 11).
3Peak LED Indicators
Each LED represents one (1) channel. This particular model has sixteen (16) channels. Thus, there are sixteen (16) LEDs located on the front panel.
(!)Cinénova IR16 can be mounted in a standard rack mount (4 rack spaces).
(!)Mounting Dimensions: 4” center to center vertical and 18.37” center to center wide.
9