Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Palmrest Cover with Touch Pad
Electrostatic
Discharge
Service Considerations
Cables and Connectors
Preparing the Computer for Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery Charger Board
CD Drive
Display Panel Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive Fan Assembly
Audio Board
System Board
Memory
Module
The palmrest cover with touch pad must be removed to gain access to any of the interior components of the computer, and it is the first component that has to be removed to gain access to the interior components.
It is not necessary to remove the display panel
NOTE: assembly to access the interior components of the computer.
To remove the palmrest cover with touch pad, complete the following steps:
1.Prepare the computer for disassembly.
2.Close the computer and turn the computer upside down.
3.Remove three screws from the bottom of the computer.
Next Step