3-5 Battery charger usage
Optional
Lamp
DC Jack
1.Insert the battery into the battery holder as shown above
2.Connect the DC JACK to the power electrical outlet.
3.Plug the power code into the electrical outlet.
4.Once the charging is completed, remove the battery from the holder.
Status | charging | charging complete |
Charging Lamp | Red | Green |
|
|
|
NOTE
In the case the battery is not fixed properly in the holder, the red lamp will be blinking, Then, extract and reinsert the battery.
3-6 Usage of Cigar Jack for charging
Optional
Printer
Battery holder
Connect the car cigar JACK charger into the printer or battery holder.
Input | 12 ~ 24V |
|
Output | 8.4V 0.8 | ~ 1.2A |
|
|
|
NOTE
Use the Cigar Jack offered by the manufacturer.
8 | 9 |