Locate and remove the first screw on the drive cage

2.The TrueQuiet™ fan has two small black clips attached to the fan’s two-speed switch. With your thumb and forefinger, spread the clips while pushing from the rear of the case to remove the switch.

3.Preparing the KUHLER H2O backplate is specific to your CPU socket. Please refer to the KUHLER H2O installation guide, available at http://www.antec.com/Believe_it/product.php?id=Mjc2OCYxNw== (KUHLER H2O 620) or http://www.antec.com/Believe_it/product.php?id=NzA0MzcwJjE3 (KUHLER H2O 920) for more information.

4.Prepare the retention ring according to the CPU socket you’re using.

5.Complete installation according to the KUHLER H2O instructions.

2.4

POWER SUPPLY INSTALLATION

We recommend removing the PSU support beam to facilitate installation. The power supply support beam has two screws on both sides: two attached to the 5.25” drive cage and two at the rear.

Antec SOLO II user manual Locate and remove the first screw on the drive cage

POWER SUPPLY INSTALLATION

1. Locate and remove the first screw on the drive cage.