Antec SOLO II user manual Internal 2.5 Device Installation

4.Twist the rear suspender and guide the hard drive through it.

5.Find the appropriate power connector on the PSU and connect it to the device.

6.Repeat the same procedure for a second drive if necessary.

7.Close and secure the drive cage door.

2.8

INTERNAL 2.5” DEVICE INSTALLATION

Toward the bottom-right of the motherboard tray, you will see a mount for a 2.5” device. To install a 2.5” device:

1.Align the 2.5” drive with the mounting holes with the back of the drive facing the back of the chassis.

2.Secure the drive to the chassis using the 2.5” drive mounting screws (same as 5.25” screws.

18