3.1
USB 2.0
Connect the front I/O panel USB cable to the USB header pin on your motherboard. Check your motherboard user’s manual to ensure that it matches the table below:
12
910
3.2USB 3.0
Pin
1
3
5
7
9
SignalNames
USBPower1
NegativeSignal1
PositiveSignal1
Ground1
Key(NoConnection)
Pin
2
4
6
8
10
SignalNames
USBPower2
NegativeSignal2
PositiveSignal2
Ground2
EmptyPin
The SOLO II comes with two front panel USB 3.0 ports and includes an internal motherboard connector. To access USB 3.0 capability from the front panel:
1.Identify the USB 3.0 header on your motherboard.
2.Connect the USB 3.0 header to the motherboard port. Be sure to align the connector in the proper orientation so that you do not damage the pins on your motherboard.
20