Pairing Your Apple Remote
Pair your Apple Remote with your iMac or another Apple product. After you pair the iMac or Apple product, it’s controlled by only the paired remote.
To pair your remote:
1Move within 3 to 4 inches (8 to 10 cm) of your iMac or Apple product.
2Point the remote at the IR receiver on the front of your iMac or Apple product.
3 Hold down Right and Menu for 5 seconds.
When you’ve paired your remote, a chainlink symbol appears onscreen.
To unpair your remote on an iMac:
1Choose Apple () > System Preferences from the menu bar.
2 Click Security, and then click Unpair.
For Apple TV or other Apple products, hold down Menu and Left to unpair.
Replacing the Battery
To replace the battery:
1Use a coin to remove the battery cover.
Battery compartment
2Insert a CR2032 battery, positive (+) side up.
3 Replace the cover and use a coin to tighten it.
Chapter 2 Life with Your iMac | 33 |