1.6 I/O Ports Arrangement
The arrangement of the I/O ports is shown in Figure 1.1.
Figure 1.1: I/O Port Arrangement
1.7Panel Mounting
1.There is an adhesive waterproof gasket on the
2.Install the
3.Find the eight clampers and eight long screws in the accessory pack. Hook the clampers to the holes around the four sides of the bezel. Insert the screws into every clamper and fasten them. These screws will push the mounting panel and fix the unit.
4.The suggested mounting panel thickness is less than 6 mm (0.236”).
5 | Chapter1 |