Apple 073-0541 warranty Removing the Computer Core From the Enclosure

Page 2

Removing the Computer Core From the Enclosure

1Place your computer on a clean, flat surface.

2Shut down your computer by opening the Special menu and choosing Shut Down. Then wait five minutes for the computer’s internal components to cool down.

3Unplug all cables from the computer except the power cord.

Note: If you have never plugged in your computer, connect the computer’s power cord and plug it in.

4Turn the computer on its side on a soft, clean cloth, and ground yourself by touching the bare metal between the video ports.

Touch

Bare

Metal

Important: To avoid electrostatic discharge, always ground yourself by touching the bare metal before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed the installation and closed the computer.

5 Unplug the power cord.

2 - Power Mac G4 Cube ATA Hard Drive

Image 2
Contents Backing Up Your Data Tools RequiredElectrostatic Discharge ESD Removing the Computer Core From the Enclosure Latch Removing the Installed Drive Installing the Replacement Drive Pull Tab Connector Door Replacing the Computer Core in the Enclosure Repackaging the Drive Apple Computer, Inc