Apple 073-0541 warranty Removing the Installed Drive

Page 4

Removing the Installed Drive

1Remove the AirPort Card, if installed.

2Press and hold the door latch, and then open the AirPort shield door.

Door Latch

3With the AirPort shield door open, pull the tab to disconnect the ATA ribbon cable connector from the hard drive.

4Disconnect the power cable connector from the hard drive. (You might need to use a ﬂat-blade screwdriver to pry up and loosen the connector.)

Pull Tab

Connector

Door

4 - Power Mac G4 Cube ATA Hard Drive

Image 4

Contents Electrostatic Discharge ESD Tools RequiredBacking Up Your Data Removing the Computer Core From the Enclosure Latch Removing the Installed Drive Installing the Replacement Drive Pull Tab Connector Door Replacing the Computer Core in the Enclosure Repackaging the Drive Apple Computer, Inc