Apple 073-0541 warranty Replacing the Computer Core in the Enclosure

Page 7

Replacing the Computer Core in the Enclosure

1Holding the core by the latch, insert the core into the computer.

Note: The core fits into the enclosure only one way. Position the core so the ports are toward the back of the enclosure.

Core

Enclosure

2With a flat hand, press down on the latch until it locks into place. Firmly press the core to ensure it is fully secured within the enclosure.

Important: Do not lift or carry your computer by the core latch. The enclosure could fall off the core and be damaged.

Latch

Power Mac G4 Cube ATA Hard Drive - 7

Image 7
Contents Electrostatic Discharge ESD Tools RequiredBacking Up Your Data Removing the Computer Core From the Enclosure Latch Removing the Installed Drive Installing the Replacement Drive Pull Tab Connector Door Replacing the Computer Core in the Enclosure Apple Computer, Inc Repackaging the Drive