Replacement Note: Before closing the side access panel, make sure the P4 and P5 power cable connectors are either attached to the hard drives or tucked inside the front hard drive carrier. (Figure 15)
Figure 15
Closing the Computer
1.Raise the side access panel, lift the latch, and press the panel against the case until it snaps securely into place.
2.Reconnect all cables and restart your computer.
Warning: Never turn on your computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury.
Power Mac G4 (Mirrored Drive Doors/FW 800) Front Panel Board Cable - 10