QSC Audio DSP-3SPECIFICATIONS, 1.5, 4, 9, 18 Vrms, 6, 14.5, 21.5, 27.5 dBu, Two 3-pinEuros

DSP-3 SPECIFICATIONS

Characteristics	Specifications
FREQUENCY RESPONSE
Euro Input	20 Hz to 10 kHz ± 0.3 dB
	20 Hz to 20 kHz ± 0.7 dB
DataPort	20 Hz to 20 kHz ± 0.2 dB
DISTORTION	<0.01% THD+N @ +4 dBu
DYNAMIC RANGE UNWEIGHTED	>93 dB, 20 Hz to 20 kHz
	for 1.5, 4, 9V input sensitivities
	>88 dB, 20 Hz to 20 kHz
	for 18V input sensitivities
COMMON-MODE REJECTION	>50 dB, 20 Hz–20 kHz typical
	>40 dB @ 20 kHz worst case
INPUT SENSITIVITY	1.5, 4, 9, 18 Vrms
(selectable)	6, 14.5, 21.5, 27.5 dBu
	3.5, 12, 19, 25 dBV
CROSSTALK	>75 dB separation,20 Hz to 20 kHz
(inter-channel w/in DataPort pair)
INPUT CONNECTORS	Two 3-pin Euros
	(1 for each audio channel)
	One HD-15 female DataPort*
	One RS-232 female (PC input)
	One Power Jack
	Required only for PowerLight,
	QSC non-DataPort amplifiers,or
	non-QSC amplifiers,using
	remote rack mounting bracket

Characteristics	Specifications
OUTPUT CONNECTORS	Two 3-pin Euros
	(for daisy-chaining each audio
	channel out)
	One HD-15, male
	amplifier connection
INDICATORS	FRONT:
	Power (one blue)
	Signal (one green)
EXTERNAL POWER REQUIREMENTS	15 VDC, 0.4 A
	Required only for PowerLight,
	QSC non-DataPort amplifiers,or
	non-QSC amplifiers,using
	remote rack mounting bracket
DIMENSIONS	3.49" (1.37 cm) height
	3.33" (1.31 cm) width
	without flanges
	4.76" (1.48 cm) width
	with flanges
	1.21" (0.48 cm) depth
WEIGHT	0.6 lbs (0.27 kg) net
	1 lb (0.45 kg) shipping
CONSTRUCTION	Steel chassis and back cover

*DataPort input for use with CM16a Amplifier Network Monitor in QSControl audio network systems for remote management of QSC amplifiers and other audio devices.

Specifications subject to change

A Remote Rack Mounting Bracket is available for PowerLight, 4-channel QSC amplifiers, or for non-DataPort- equipped amplifiers. Designed to be bolted to the rear of an amplifier rack, up to four modules can be mounted to each panel, providing up to eight channels of DSP processing in a three rack-unit space.