QSC Audio DSP-3CONFIGURATIONS, Signal Manager, Compatible Amplifier Models, Available in early

DSP-3 CONFIGURATIONS

SIGNAL MANAGER

Advanced “Drag-and-Drop” Software Configuration

DSP configuration is made simple with a PC-based “drag-and-drop” software program called Signal Manager. Users can access a DSP “toolbox” and simple drawing tools to configure processing functions and signal flow. DSP processing power and memory is dynamically assignable to signal processing functions and any combination of functions may be configured until the total capacity is used. DSP resources are graphically displayed at the bottom of the screen.

Configurations can be downloaded directly to the DSP-3 via an RS-232 serial port or through a QSControl Audio Network System* via CM16a Amplifier Network Monitor for added simplicity. The software package also offers real-time control and set-and-forget convenience.

Configurations can be saved and recalled for future use.

* Available in early 2001.

Whether you need speaker crossovers, EQ, time delay, or subsonic filters, the DSP-3 is as flexible as your system’s needs.

COMPATIBLE AMPLIFIER MODELS

The DSP-3 mounts directly to the back of these amplifier models via the DataPort:

•Two-channel CX Series

•Two-channel DCA Series

•PowerLight 2 Series

The following models require a Remote Rack Mounting Bracket:

Full Feature		Without Power Limiting
•	Four-channel CX Series	•	MX
•	Four-channel DCA Series	•	USA
•	PowerLight Series	•	PLX
		• RMX
		• Non-QSC amplifiers