Acer Z5751, Z3751, Z3750, Z5750 manual Power Management Setup, S3 STR, Last State

Power Management Setup

Field	Description	Value
ACPI Suspend	Use this item to define how your system suspends. Default value is S3	S3 (STR)
Mode	(STR), the suspend mode is suspend to RAM, i.e., the system shuts	S1 (POS)
	down with the exception of a refresh current to the system memory.
Deep Power Off	Enables or disables compliance to the Energy-using Products Lot 6	Enabled
Mode	Directives (EuP Lot 6).	Disabled
Power On by RTC	Enables or disables the system to wake up from a power-saving mode	Enabled
Alarm	when an RTC alarm occurs.	Disabled
Power On by PCIE	Enables or disables the system to wake up from a power-saving mode	Enabled
Devices	when an event occurs on an installed PCI Express device.	Disabled
Power On by PCI	Enables or disables the system to wake up from a power-saving mode	Enabled
Devices	when an event occurs on an installed PCI device.	Disabled
Power On by	Enables or disables the system to wake up from a power-saving mode	Enabled
Modem Ring	when a modem signal is received. network message	Disabled
Power On by	Enables or disables the system to wake up from a power-saving mode	Enabled
Onboard LAN	when the onboard LAN controller received a network message.	Disabled
Wake Up by PS/2	Enables or disables the system to wake up from a power-saving mode	Enabled
KB/Mouse	when a PS/2 keyboard or mouse is used.	Disabled
Wake Up by USB	Enables or disables the system to wake up from a power-saving mode	Enabled
KB/Mouse	when a USB keyboard or mouse is used.	Disabled
Restore On AC	Select the power state when an AC power loss occurs.	Power Off
Power Loss	• Off - The computer remains off until the power button is pressed.	Power On
	• Last State - The computer reverts to the last power state before the	Last State
	power loss occurred.
	• On - The computer switches back on after the AC power loss.

Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide 19