Acer Z3751, Z3750, Z5750, Z5751 manual DIM Code Checkpoints, Post Error Messages

DIM Code Checkpoints

The Device Initialization Manager (DIM) gets control at various times during BIOS POST to initialize different system busses. The following table describes the main checkpoints where the DIM module is accessed.

Checkpoint	Description
2A	Initialize different buses and perform the following functions: Reset, Detect, and Disable
	(function 0); Static Device Initialization (function 1); Boot Output Device Initialization
	(function 2). Function 0 disables all device nodes, PCI devices, and PnP ISA cards. It also
	assigns PCI bus numbers. Function 1 initializes all static devices that include manual
	configured onboard peripherals, memory and I/O decode windows in PCI-PCI bridges,
	and noncompliant PCI devices. Static resources are also reserved. Function 2 searches
	for and initializes any PnP, PCI, or AGP video devices.
38	Initialize different buses and perform the following functions: Boot Input Device
	Initialization (function 3); IPL Device Initialization (function 4); General Device Initialization
	(function 5). Function 3 searches for and configures PCI input devices and detects if
	system has standard keyboard controller. Function 4 searches for and configures all PnP
	and PCI boot devices. Function 5 configures all onboard peripherals that are set to an
	automatic configuration and configures all remaining PnP and PCI devices.

POST Error Indicators

When a system error is detected during POST (Power On Self Text), the Setup utility will switch to diagnostic mode and will either:

•Displays a POST error message, or

•Emits a series of beep codes

POST Error Messages

POST error messages tell users what failure the system has detected. Some error messages could be related to a hardware device. Others may indicate a problem with a device configuration. In some cases an error message may include recommendations for troubleshooting or require that you press the Enter key to display recommendations. Follow the instructions on the screen. It is recommended that you correct the error before proceeding, even if the computer appears to boot successfully.

IMPORTANT If your system fails after you make changes in the Setup menus, reboot the computer, enter Setup again and load Setup defaults to correct the error.

72 Aspire Z3750 / Z3751 / Z5750 / Z5751 AIO Computer Service Guide