Acer M265 manual Standard Cmos Features, Parameter Description Options

Standard CMOS Features

Select standard CMOS features from the main menu to configure some basic parameters in your system the following screen shows the standard CMOS features menu:

The following table describes the parameters found in this menu.

Parameter	Description	Options
System Date	Set the date following the weekday-month-day-year format.
System Time	Set the system time following the hour-minute-second format.
Primary IDE Master/Slave	Allows you to configure the hard disk drive connected to the master port of
	IDE channel. To enter the IDE Master or Slave setup, press [Enter]. The IDE
Secondary IDE Master/Slave
	CD-ROM is always automatically detected.
Third IDE Master/Slave
IDE BusMaster	When enabled, BIOS uses PCI bus-mastering for	Enabled
	reading/writing to IDE drives.	Disabled
Drive A	The category identifies the types of floppy disk drive A	Disabled
	that has been installed in the computer..	720 KB 3.5 inch
		1.44 MB 3.5 inch
		2.88 MB 3.5 inch
		Not Detected

21