Quick Power On Self | This feature allows the system to skip certain tests while booting. | Enabled |
Test | When this function is enabled, it will decrease the time needed to | Disabled |
| boot the system, which means to quick power on self test |
|
| function |
|
|
|
|
Quiet Boot | When enabled, the BIOS splash screen displays during startup. | Enabled |
| When disabled, the diagnostic screen displays during startup. | Disabled |
|
|
|
Boot Up NumLock | Sets the NumLock status when the system is powered on. | On |
Status | Setting to On will turn on the NumLock key when the system is | Off |
| powered on. Setting to Off will allows users to use the arrow keys |
|
| on the numeric keypad. |
|
|
|
|
APCI Mode | This item allows you to enable or disable the APIC (Advanced | Enabled |
| Programmable Interrupt Controller) mode. APIC provides | Disabled |
| symmetric |
|
|
|
|
1st/2nd/3rd Boot Device | Specifies the boot order from the available devices. | Hard Disk |
|
| DVD |
|
| Removable |
|
|
|
Hard Disk Drive | Press Enter to access the Hard Disk Drive Priority submenu and specify the boot | |
| device priority sequence from available hard drives. |
|
|
|
|
CD/DVD Drive | Press Enter to access the Removable Device Priority submenu and specify the boot | |
| device priority sequence from available removable drives. |
|
|
|
|
Boot Other Device | When it is enabled, the system searches all other possible | Yes |
| locations for an operating system. If it fails to find on in the | No |
| devices specified under the first, second, and third boot devices. |
|
|
|
|
23